Download as PDF
Engineering Science
Overview
Official Name of Program
Plan Code
Department(s) Sponsoring Program
Career
Degree Designation
HEGIS Code
NYSED Program Code
CIP Code
There are two areas of specialization in the Engineering Science BS. They are: Computer Engineering Specialization (CES) and Mechanical Engineering Specialization (MES). Students may choose to follow one of these areas of specialization.
Liberal Arts and Sciences Requirement
Of the 133 credits required for the BS in Engineering Science, at least 66 must be in liberal arts and sciences courses. Most courses designated ENS are non-liberal arts and sciences; those ENS courses that are cross-listed in mathematics (MTH) or physics (PHY) are liberal arts and sciences.
Transfer Program
Students who have graduated with a two-year Associate in Applied Science (AAS) degree in one of the engineering technologies can be admitted to the BS degree program. Their previous courses are evaluated, and they are usually required to take such bridging courses as course Physics for Engineers and course Introduction to Scientific Computing, as well as additional mathematics courses.
The requirements for the transfer program are identical to those given above for the BS in Engineering Science.
Major Requirements:
Same as BS in Engineering Science
Electives: 4 credits (for all three specializations)
Total Credits Required: 133
Requirements
In Residence at the College of Staten Island
Liberal Arts and Sciences Content Courses
*22 credits required for the Major also satisfy general education requirements.
- 0682881
OR 0680811
Students who enter the College with fewer than six credits are required to complete the non-credit College Life Unit Experience Program (CLUE) or complete a one-credit orientation course (SPD 101: Issues in College Life, or SKO 100: SEEK Freshman Orientation.) Students are expected to complete this requirement during their first semester or prior to the completion of 12 equated credits.
To satisfy this requirement students must:
Choose one of the following:
Successfully complete a one-credit freshman orientation course: SPD 101: Issues in College Life or SKO 100: SEEK Freshman Orientation (open only to SEEK students)
OR
Complete the five components of the non-credit College Life Unit Experiences (CLUE) program, which include: attendance at a general orientation session on such topics as the purposes of higher education, an overview of College policies and services, and an appreciation of diversity. Students should attend the orientation session prior to the beginning of classes.
ANDAttend four CLUE-certified events: two Personal Growth Experiences and two Co-curricular Experiences. Personal Growth topics include study skills, career development, self-development, substance abuse, and pluralism. Co-curricular Experiences include events offered in conjunction with the scholarly, cultural, and civic programs presented regularly at the College.
- 0636801
- 0636821
- 0661141
- 0673621
- 0673631
- 0673691
AND 0626781 - 0643471
AND 0631381
- 0622991
AND 0661151 - 0622991
AND 0661161 - 0622991
AND 0673821
Required Core: 12 credits
Flexible Core: 18 credits
At least six credits must be taken at the 200 level or higher in the Flexible Core and College Option combined.
STEM courses identified as having both the Life and Physical Sciences (LP) and Scientific World (SW) requirement designation may satisfy either/or Common Core area. No single course may be used to fulfill both areas.
Advanced standing and college credit may be awarded to students who complete college-level work while still in high school. These include Advanced Placement Courses (AP), College Level Examination Programs (CLEP), College Now, and International Baccalaureate (IB). Official AP or CLEP scores, your IB diploma, or official college transcripts must be submitted to the Registrar’s Office for review.
Some courses in this area have a required corequisite laboratory course (1 credit; 2 hours) that will satisfy the College Option. To fulfill the general education requirements non-transfer baccalaureate students must take at least one course from this area with a linked laboratory.
Students pursuing any BA degree program or the following BS degree programs: Business with International Business concentration, Communications, Dramatic Arts, Music, and Social Work, will be required to take an introductory or intermediate level language course unless they have tested or been exempted. All STEM majors and other Bachelor of Science students may choose any course offered in this area.
Language Placement Examination
A language placement test is required for all students who wish to register for any 112-level language or above. Placement examinations are given by the Department of World Languages and Literatures. These examinations determine placement at the appropriate course level.
General Education Appeal
If language placement is at or above the 114-level language, students may submit a general education appeal to have that course satisfy the World Cultures and Global Issues area.
The Flexible Core is made up of six courses, with at least one course from each of the following five areas and no more than two courses in any discipline or interdisciplinary field: World Cultures and Global Issues, U.S. Experience in its Diversity, Creative Expression, Individual and Society, and Scientific World. This is required for students in AA, AS and bachelor’s degree programs.
At least one course chosen to fulfill the Flexible Core and/or College Option must fulfill the Pluralism and Diversity Requirement. Students are encouraged to select a course that fulfills this requirement in the Flexible Core.
At least one course taken to fulfill the Flexible Core and/or College Option must fulfill the Contemporary World Requirement. This course may be the same course as the one selected to fulfill the Pluralism and Diversity Requirement, provided that the course appears on both approved course lists. Students are encouraged to select a course that fulfills this requirement in the Flexible Core.
To fulfill general education requirements non-transfer baccalaureate students must take at least one course from the Scientific World bucket with a linked laboratory.
Transfer Students:
Pathways makes it easier for students to transfer from one CUNY college to another. When a student has met a Common Core or College Option requirement at one CUNY school, those requirements will be met at any other CUNY school
The College of Staten Island subscribes to the CUNY Policy on guaranteed transferability of CUNY Pathways courses and their Requirement Designations. Students who receive credit for a course at a different requirement designation than they previously took can contact transferstudents@csi.cuny.edu for review and adjustment.
Courses identified with a (social science) at the end of the course title satisfy the Social Scientific Analysis requirement. These courses may be selected from the lists for Contemporary World (CW); Pluralism and Diversity (P&D); or from among those listed under Social Scientific Analysis requirements (social science).
Courses identified with a (TALA) at the end of the course title satisfy the Textual Aesthetic and Linguistic Analysis requirement. These courses may be selected from the lists for Contemporary World (CW); Pluralism and Diversity (P&D); or from among those listed under Textual, Aesthetic, and Linguistic Analysis (TALA).
Any 300- or 400-level course in foreign literature or equivalent courses in other languages, if offered. Some of these courses require a reading knowledge of the language; others allow students without knowledge of the language to read the works in English translation. Foreign language courses at the 300- or 400-level are included since many students place directly into these upper-level courses and need not pass through the prerequisite language courses.
STEM majors may allow students to replace either one TALA or one social science requirement with a broadly-defined STEM course.
3 credits is the minimum requirement. Students may opt to take course bearing 4 credits and either 3 or 4 hours to fulfill these requirements; additional credits will be applied towards electives.
3 credits is the minimum requirement. Students may opt to take course bearing 4 credits and either 3 or 4 hours to fulfill these requirements; additional credits will be applied towards electives.
Courses fulfilling this requirement are designed to provide an understanding of global and regional contexts. This requirement will cover contemporary global issues, ideas, and institutions. The courses will emphasize the interactions of societies along political, economic, and cultural dimensions. Courses will cover the development, formation, and impact of the global context and ways in which different nations, societies, and cultures influence and are influenced by global forces. Students will use comparative and historical analytic frameworks for understanding the contemporary world.
At least one course taken to fulfill the Flexible Core and/or College Option must fulfill the Contemporary World Requirement.
Contemporary World courses are at the 200-level or above, have ENG 151 and any US Experience in its Diversity (US) course a prerequisites, a significant writing component, and subscribe to the principle of writing across the curriculum. Courses identified with a (CW) at the end of the course title satisfy the Contemporary World requirement. These courses may be selected from the lists for Social Scientific Analysis (social science); Pluralism and Diversity (P&D); Textual, Aesthetic, and Linguistic Analysis (TALA); or from among those listed under Contemporary World (CW). Courses with a (P&D) at the end of the course title also fulfill the Pluralism and Diversity requirement.
Courses fulfilling this requirement are designed to provide an understanding of global and regional contexts. This requirement will cover contemporary global issues, ideas, and institutions. The courses will emphasize the interactions of societies along political, economic, and cultural dimensions. Courses will cover the development, formation, and impact of the global context and ways in which different nations, societies, and cultures influence and are influenced by global forces. Students will use comparative and historical analytic frameworks for understanding the contemporary world.
At least one course taken to fulfill the Flexible Core and/or College Option must fulfill the Contemporary World Requirement.
Contemporary World courses are at the 200-level or above, have ENG 151 and any US Experience in its Diversity (US) course a prerequisites, a significant writing component, and subscribe to the principle of writing across the curriculum. Courses identified with a (CW) at the end of the course title satisfy the Contemporary World requirement. These courses may be selected from the lists for Social Scientific Analysis (social science); Pluralism and Diversity (P&D); Textual, Aesthetic, and Linguistic Analysis (TALA); or from among those listed under Contemporary World (CW). Courses with a (P&D) at the end of the course title also fulfill the Pluralism and Diversity requirement.
College Option: 6-12 credits
The College Option requirements is comprised of 200-level or higher, except for the laboratory and language courses, and ranges from 6 to 12, depending on whether a student transferred into the college and, if so, how many credits he or she had at the time of transfer.
At least six credits must be taken at the 200 level or higher in the Flexible Core and College Option combined.
Transfer Students:
Pathways makes it easier for students to transfer from one CUNY college to another. When a student has met a Common Core or College Option requirement at one CUNY school, those requirements will be met at any other CUNY school
The College of Staten Island subscribes to the CUNY Policy on guaranteed transferability of CUNY Pathways courses and their Requirement Designations. Students who receive credit for a course at a different requirement designation than they previously took can contact transferstudents@csi.cuny.edu for review and adjustment.
*22 credits required for the Major also satisfy general education requirements.
- 0622921
- 0622991
- 0626781
- 0643381
- 0643391
- 0643421
- 0643431
- 0643451
- 0643461
- 0643471
- 0643511
- 0643571
- 0643651
- 0643671
- 0644031
- 0644041
- 0644051
- 0661121
- 0661131
OR 0661141 - 0661151
- 0661161
- 0661311
- 0673631
- 0673691
- 0673701
- 0673821
- 0631371
- 0675431
- 0631511
- 0661271
OR 0661321
- 1209231
- 0626871
- 0626831
- 0643551
- 0643861
- 0643891
- 0627111
- 1354521
- 0643771
- 0643841
- 0643881
- 0643951
- 0643961
- 1529841
- 0643971
- 0643991
- 0644011
- 1529851
- 0643521
- 0643681
- 0643901
- 0643911
- 0643751
- 0643831
- 0643841
- 0643851
- 0643881
- 0643951
- 0643961
- 1529841
- 0643981
- 0643991
- 1529851
Additional Comments:
Chemistry Advisory
One-year of high school chemistry is required prior to entry into course and course. If you have not completed one-year of high school chemistry you will be required to complete course and course prior to registering for course and course.
Mathematics Placement
Depending on mathematics placement, some students may have to complete course, and/or course and/or course, and/or course prior to enrolling in course/course or course/course.
To graduate with honors in Engineering Science a student must meet the following requirements:
Fulfillment of all the requirements for the Engineering Science degree
An overall grade point average of 3.5 and a grade point average of 3.5 in the major
Outstanding achievement as demonstrated by ONE or more of the following:
Exceptional senior project
Authorship in a paper or abstract at the refereed conference or journal proceedings in the field
Major recognition award for undergraduate research work within the CUNY community
In order for the honors option to be awarded, the student needs to be nominated by faculty or apply before graduation and honors status will be judged and awarded by a departmental committee.
The Engineering Science program offers a number of senior-level electives for students interested in further work in a particular area of engineering and for students interested in graduate work in engineering. Students should consult an advisor in the program for details. Concentrations are available in the following areas:
Computer Engineering - Communications and Networking
Computer Engineering - Operating Systems
Computer Engineering - Architecture and Organization
Computer Engineering - Artificial Intelligence
Electrical Engineering - Electronics
Electrical Engineering - Control Systems
Electrical Engineering - Communication Systems
Electrical Engineering - Energy Systems
Mechanical Engineering - Heat Transfer
Mechanical Engineering - Fluids and Aerodynamics
Mechanical Engineering - Biomedical Applications
Mechanical Engineering - Environmental Control